Hot

EPAX X1-N

530,00 

3.5-inch Color TFT Touch Screen.
2K (5.5 inch) LCD masking screen. 2560*1440 (2k) HD masking LCD gives very fine printing details.
Improved Z axis stability. 40W High Energy 50 LED light source.
Pre-installed non-FEP film (Imported from Japan) to allow easier detachment. Several times more expensive and much better than FEP film. You can use FEP films with this printer too.
Ultra-Precise Fixed Build Platform – Calibrated to perfection right out of the factory. The EPAX uses a 4 point mount that is rock solid and was already calibrated perfectly out of the box. Each and all printers were individually calibrated at the factory!

10 in stock

Categories:
,
Tag:

Epax X1-N IN STOCK

X1 now has new ChiTu mainboard equipped (Model X1-N), which uses much more efficient CTB format and has grayscale AA.  It also uses SX04 LCD screen interface.   Since day one, all our 5.5 LCD screens have both SX04(internal default) and SX03 interfaces.   The SX04 to SX03 converter is covered/hidden by black tape.  So all screens are compatible.  The new X1 model is named as X1-N.  To use the screen on X1-N, you will need to carefully remove the black tape on screen’s cable to expose SX04 interface.

 

 

3.5-inch Color TFT Touch Screen.
2K (5.5 inch) LCD masking screen. 2560*1440 (2k) HD masking LCD gives very fine printing details.
Improved Z axis stability. 40W High Energy 50 LED light source.
Pre-installed non-FEP film (Imported from Japan) to allow easier detachment. Several times more expensive and much better than FEP film. You can use FEP films with this printer too.
Ultra-Precise Fixed Build Platform – Calibrated to perfection right out of the factory. The EPAX uses a 4 point mount that is rock solid and was already calibrated perfectly out of the box. Each and all printers were individually calibrated at factory!
Better Chassis Design – The EPAX is built like a tank with an all-steel chassis with minimal windows.
Sanded Build Platform Surface made with expensive soft aluminum, unlike others using cheap hard aluminum.
Anti-Aliasing supported and enabled in installed firmware!
Wide selection of resins. Support 405nm wavelength 3D printing resins
115mm (L) *65mm (W) *155mm (H) build volume
XY resolution reaches 0.047mm; Minimal Z layer height is 0.01mm

Accessories included:

1x extra non-FEP film
1x USB stick loaded with manual PDF file, a sample print file and a ChiTuBox config file.
1x power adapter
1x shovel
2x resin filters

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Compare
Wishlist 0
Open wishlist page Continue shopping